NZXT Tempest EVO Manuel d'utilisateur Page 1

TEMPEST EVO User’s manual

NZXT. 8 2. Remove the 5.25” black mesh for the 5.25” bay, by pushing the clips aside from inside the panel or unscrewing the screw (3 bays are scre

NZXT. 9 6. Turn the screw less bracket to lock the drive. Turn and lock the device in place. User may choose to screw the device on also.

NZXT. 10 3. Remove the cage.(Refer to page 13 for more information) 4. Attach the rails to the side of the case. 5. Slide the 5.25” drive into t

NZXT. 11 External 3.5” Drive Bay Installation The NZXT Tempest comes standard with one external 5.25” to 3.5” bracket attached to the inside the

NZXT. 12 4. Slide the bracket back into the cage to secure it. The hard drive secured into the cage

NZXT. 13 Front fan, filters and HDD Cage usage NZXT has installed filters at the front of the chassis for easy cleaning and removal. Also included a

NZXT. 14 Push the tabs to remove the cage Installing the power supply The NZXT Tempest power supply bracket is located at the rear bottom of the ch

NZXT. 15 Secure from behind the chassis Managing the cables The NZXT Tempest allows the user to hide cables behind the motherboa

NZXT. 16 Water tubes can be routed in from behind the case. Holes are drilled at the top panel to secure a dual 120mm radiator.

NZXT. 17 Support and Service If you have any more questions or have problems with the NZXT product you purchased, please don’t hesitate to con

NZXT. 1 Thank you. Dear valued customers, Thank you for purchasing our product. We are thankful to all our fans for the continuing support, after ju

NZXT. 2 Tempest Specifications Features > The King reborn: Dual 120mm intake, Dual 140mm Exhaust with an additional side 120mm fan and rear 120m

NZXT. 3 Cooling Options: 2 x 120 mm Blue LED Intakes (Included) 2 x 140 mm Black Top Exhausts (Included) 1 x 120mm Rear Exhaust (Included) 1 x 120mm

NZXT. 4 Before Beginning.. For safety issues, it is highly recommended that all users wear gloves during installation. Also, if you have any questi

NZXT. 5 Motherboard Installation Please refer to the case interior infrastructure and secure the power supply at the back of the case by using the s

NZXT. 6 2. Connect the power switch pin (labeled POWER SW) to the PWR connector on the motherboard. (Yellow/White +/-) 3. Connect the HDD LED (labe

NZXT. 7 Audio Port Installation 1. Please first refer to your motherboard manual and match the labels on the audio wires with your motherboard pins.